13. Set/Check Mic Sensitivity (Low or HI) Press and hold the
Navi/Menu button for 2 seconds until the menu window activates. Use
Jog Wheel to navigate to "Rec Set" and then "Mic Sens." Select
"High" if you are recording ambience or "Low" if you are recording
close voice or loud sound effects.
14. Set in Manual Record Level Mode Unfortunately, one cannot go
directly into Manual Record Mode; you must go into Auto Gain mode,
place it in pause and then use the menu to change to Manual
Record level. Push the RED REC button down and slide the button to
the right to put the recorder in instant record mode (auto gain).
Press on the PAUSE BUTTON. Press and hold the Navi/Menu button
for 2 seconds until the menu window activates. Rotate jog wheel until
"REC Set" is blinking. Select “REC Volume,” and then “Manual.” You
can now adjust Record Level manually with the Jog Wheel. Set the
record level gain so the normal volume "peaks" cause about 1/2 of
the segments to come on (turn black). Notice that the over-
modulation segment occurs right under the “0” of “30.”
You can change the record level as the deck while recording if
necessary.
MIC IN
Headphone OUT
Comments to this Manuals